External Lightning Protection
Air-terminal arrays, rooftop mesh, natural down-conductors.
Product Portfolio
Real products. Real photos. Real protection.
Five proven CAPE Electric families, delivered across the Middle East within 48 hours. Every component you see here is on the shelf in Doha and Dubai right now.
01 — Product Family
Lightning Protection Systems
Engineered to IEC 62305 & NFC 17-102. Certified ESE and Franklin-rod systems with full accessory lines.
When a cloud charges 500,000 amps, you want CAPE on the roof.
The Middle East sits within some of the world's most active lightning corridors — and as structures reach higher and assets get more expensive, the cost of an unprotected strike is measured in millions. Our LPS offering combines air-terminal technology, down-conductor networks and earth-terminations into one integrated defence.
- ⚡Early Streamer Emission (ESE) Air Terminals
Extended protection radius per NFC 17-102 — fewer terminals, cleaner rooflines. - ⚡Franklin-Rod / Conventional LPS
Full IEC 62305-compliant mesh / catenary systems for traditional deployments. - ⚡Down Conductors & Test Joints
Copper tape, round conductors, insulated HVI cable — complete accessory range. - ⚡Lightning Event Counters
Auditable strike records for compliance, maintenance and insurance purposes.
Integrated Lightning Protection
Engineered into the structure — concealed, architectural, compliant.
Universal Clamps & Connectors
Round-to-flat, round-to-round clamps for flexible termination.
02 — Product Family
Global Earthing System
Low-impedance, zero-maintenance earth grids for every soil condition from sabkha to granite.
Ground impedance under 1 ohm — no matter the soil.
Gulf soils are notoriously hostile: high resistivity, corrosive chlorides, volatile thermal expansion. A rod pushed in and forgotten just won't cut it. Our Global Earthing System is a complete portfolio — electrodes, compounds, conductors, jointing — engineered for 30+ year service life in the most difficult terrain.
- 🌍Copper-Bonded Earth Rods
Molecular-bonded 254 µm copper coating, threadable to 12 m for deep-soil installations. - 🌍Stainless Steel Electrodes
316L grade for aggressive coastal/sabkha environments where copper alone won't survive. - 🌍Exothermic Welding & Bonding Clamps
Permanent molecular bonds between conductors — zero loosening, zero corrosion at the joint. - 🌍Equipotential Bonding Rails
Light-duty and heavy-duty rails to consolidate clean-earth references for sensitive systems.
In-stock · GCC
Copper-Bonded Flat Conductor
High-conductivity tape for down-leads and mesh earthing.
Multi-Purpose Bonding Clamp
Round-to-flat bonding for conductor interconnects.
Earth Stud & Accessories
Equipment grounding studs with pre-terminated leads.
Equipotential Bonding Rail — Heavy Duty
Consolidated earth reference for MV/HV substations.
Diagonal Clamp
Angled conductor junctions for roof-level LPS networks.
Universal Clamp
Versatile cross-over jointing for tape and round conductors.
03 — Product Family
Non-Metallic IP-Rated Boxes & Panels
GRP, polycarbonate and halogen-free enclosures — IP54 to IP66, UV-stable, corrosion-proof.
Enclosures that laugh at sandstorms.
From a tiny junction box in a villa's attic to a distribution panel on an offshore platform, the enclosure is the first — and sometimes only — barrier between your electrics and the elements. We stock GRP, polycarbonate and mild-steel enclosures rated from IP54 to IP66, with UV stability exceeding 50 years.
- 📦GRP & Polycarbonate Enclosures
Corrosion-proof, non-conductive, halogen-free — ideal for coastal and chemical plants. - 📦IP65 / IP66 Weatherproof DBs
Single / three phase TPN boards with provision for MCCB, RCBO, metering and SPDs. - 📦Fire-Resistant Enclosures
Intrinsic fire-resistant boxes qualified for tunnels, underground vaults and escape routes. - 📦Custom Panel Builds
LV/MV panels, change-over, ventilation & PLC enclosures drilled to project BOQ.
IP66 · GRP
Junction Box
Weatherproof looping chambers with gasket seals.
MCB Distribution Board
TPN distribution boards for residential and commercial.
Intrinsic Fire-Resistant Box
For life-safety circuits and emergency lighting.
GRP Panel Enclosures
Transparent-door variants for live status indication.
GRP Door-Type Enclosures
Safybox Bres range for industrial switchgear.
GRP Feeder Pillar Enclosures
Safybox Art range — outdoor-rated utility pillars.
04 — Product Family
Industrial Plug & Socket
IEC 60309 CEE-form connectors rated 16A to 125A, IP44 to IP67 — interlocked and sealed.
Heavy-duty connections, engineered for abuse.
Industrial sites don't give connectors a gentle life — forklift drops, washdowns, vibration, live disconnection. Our CEE-form IEC 60309 range is rated for every scenario from a generator hookup to a 125A bus-duct tap, with colour-coded voltage banding, IP67 sealing and mechanical interlocks that meet every site's code requirements.
- 🔌16A to 125A, 3 / 4 / 5 Pin
Complete CEE-form range (230V / 400V / 500V) with straight & angled flanges. - 🔌IP44 to IP67 Sealed
Self-closing lids, watertight gaskets for washdown and outdoor use. - 🔌Interlocked Socket Units
Mechanical interlock prevents making/breaking under load — code-compliant. - 🔌Pre-wired Distribution Assemblies
Socket combinations with RCBO, SPD and metering for site temporary power.
IEC 60309
Industrial Plugs
3, 4 & 5 pin CEE-form plugs in all IEC colour codes.
Panel-Mount Sockets
Flush and angled flange variants for DB integration.
Interlocked Switched Sockets
Mechanical interlock — safe to plug and unplug under load.
High-Amperage Connectors
63A & 125A units for generators and heavy loads.
Socket Combinations
Pre-wired assemblies with RCBO and SPD for site power.
IP67 Waterproof Range
Submersion-rated units for washdown and marine use.
05 — Product Family
Surge Protection Devices
Coordinated Type 1 + Type 2 + Type 3 SPDs for AC, DC, PV and signal lines. IEC 61643 compliant.
The 200 microseconds that save six zeros.
Not every surge comes from the sky. Switching transients, grid disturbances and induced EMP account for more electronics damage than direct lightning strikes. Our SPD range delivers coordinated Type 1 + Type 2 + Type 3 protection for AC power, DC systems, signal lines and PV installations — with pluggable cartridges, remote indication and fail-safe disconnection.
- 🛡Type 1 — Main Incomer SPDs
10/350 µs spark-gap and MOV hybrid technology, Iimp ratings up to 100 kA. - 🛡Type 2 — Sub-DB SPDs
8/20 µs MOV-based, In up to 40 kA — the workhorse of most commercial installations. - 🛡Signal & Data-Line SPDs
Coax, RS-485, telephone, Ethernet and CCTV surge-protected modules. - 🛡DC & PV SPDs
Purpose-built 1000V DC & 1500V DC SPDs for solar plants and battery banks.
Type 1+2+3
Bus-Bar Mounted SPD
Direct-mount units for main incomer bus-ducts.
Type 1 SPD
Spark-gap + MOV hybrid for direct-strike protection.
Type 2 SPD
MOV-based sub-DB protection with pluggable cartridges.
SPD for Data & Signal Lines
Coax, RJ45, RS-485 and analog signal protection.
DC & PV SPDs
1000V DC & 1500V DC for solar & battery banks.
Combined Type 1+2 SPDs
Single-unit protection where panel space is limited.